Filter
Top Products
nNSTALLATHON STEP 4
Position the Opener
Follow instructions which apply to your door type as
glustrated
SECTIONAL DOOR OR ONE-PIECE DOOR WITH
TRACK
A 2x4 laid flat is convenient for setting an ideal
door-to-rail distance
. Remove foam packaging.
. Raise the opener onto a stepladder You will need
help at this point if the ladder is not tall enough,
- Open the door all the way and place a 2x4 laid flat
on the top section beneath the rail,
• If the top section or panel hits the trolley when you
raise the door, pult down on the trolley release arm
to disconnect inner and outer sections Slide the
outer trolley toward the motor unit, The trolley can
remain disconnected until Installation Step 12
is completed,,
,oy
o,oo oA,m--Il
ENGAGED RELEASED
, iCAUTi0N i
Topreventdamageto garagedoor, restgaragedoor t
openerrail on 2x4placed ontop sectionof door t
J
Ra_I ii
lil from ceiling "
ON E-PIECE DOOR WITH OUT TRACK
A 2x4 on its side is convenient for setling an ideal
door-to-rail distance
, Remove foam packaging
• Raise the opener onto a stepladder., You will need
help at this point if the ladder is not tall enough,
, Open the door all the way and place a 2x4 on its
side on the top section of the door beneath the rail
• The top of the door should be levei with the top of
the motor unit,, Do not position tile opener more
than 4" (!0 cm) above this point.
Header fj
/ Brecket _i
Ei
TopofDoor Ivl'__
_ 2x4 ts usedtodetermine
.e,O.,
15