Filter
Top Products
Accessories
Sears offers many useful accessories for your garage door opener. They ere illustrated below with
Sears model numbers and descriptions.
i139.53702
f
139.53703
139.53804
Emergency Key Release:
Requiredfor a garage with NO
access door. Enables homeowner
to open garage door manually from
outside by disengaging trolley.
Outdoor Key Switch:
i Operates the garage door
automatically from outside when
remote control is not handy.
8 Foot Rail Extension
To allow an 8 foot door to open fully.
139.53681
139.53680
139.53684
SECURITY+ 3-Function Remote
Control:
Includes visor clip.
SECURITY+ Compact
3-Function Remote Control:
With loop for attaching key ring.
SECURITY+ Keyless Entry:
Enables homeowner to operate garage
door opener from outsideby entering a
password.Also can add a temporary
passwordforvisitorsor service
persons. This temporarypasswordcan
be limitedto a programmablenumber
of hoursor entries.
139.53805
53589
10 Foot Rail Extension:
To allow a 10 foot door toopen fully.
Support Brackets:
i For finished ceilings or where
additional support is required,
based on garage construction.
Includes brackets and fastening
hardware.
139.53686
139.53709
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in
the home with a remote,
Door Clearance Brackets:
(For Sectional Doors On12)
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage withlow headroom clearance.
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Premium Control Console:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the password, then
press and ho/dthe Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the SRT (learn) button on the
opener panel. After the opener light flashes,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
38