Filter
Top Products
26 27
CLEANING METHOD
Inside water tank
Remove the ceramic filter
from the bottom part of
the water drum cover,
and clean by agitating in
room-temperature water.
Close the water supply valve, press the cold
water button at the front of the product for 3
seconds to turn off the cold water function,
and completely drain the
cold/room-temperature water
by selecting continuous cold
water extraction mode.
Open the drain door, and remove the red drain
safety cap. Using the drainage hose, completely
discharge all the hot water in the tank, and
store the water. When the water
is completely drained, pull out
the power cord.
Open the top cover of the product, and open the water drum
cover inside the product.
1
2
3
4
Cleaning Method
Installation and Cleaning
Clean the surface of the water drum with a
soft cloth.
Rinse the water drum with
the previously stored room-
temperature water, plug the
power in, and completely
drain the rinsing water using
the cold water continuous
extraction function.
Fix the ceramic filter underneath the water drum cover, and
close the water drum cover.
5
6
7
Close the top cover and then connect the power cord
before opening the main water supply valve. After
checking water extraction from the faucet of the
cold/room water and hot water, press the cold water
selection switch in front of the product for re-operation.
8
Please close the cover of the storage
tank completely.
Ants or other substances might get inside.