Filter
Top Products
18 19
PREPARATIONS
OPERATION PART
/INDICATION PART
Please check before use
Regular filter change
The regular filter change is very
important to have clean water. The filter
after life is ended may degrade the
performance. Thus, do not miss the
time for the filter change.
■
In case of no service for a long time
In case of no service for a long time,
completely drain the water from the tank.
Next, fill and empty water again. And use
the product.
■
When not using for a long time please lock the main
water supply valve and plug out the power cord.
Operation Part/Indication Part
Hot water
lock button
Hot water mode lamp
/ hot water 3 step LED
1
Cold water mode lamp
/ cold water 3 step LED
2
3
▶
Hot water
lock on
4
Light detection
sensor
8
Hot water
button
5
▶
▶
Cold
water button
7
▶
▶
▶
▶
Room water
button
6
▶
The lamp is on when hot water mode
is selected. The lamps reflect the
temperature of the water, so more
lamps come on as the temperature
gets higher.
Hot water mode lamp
Hot water temperature 3 step LED
The lamp is on when a cold water
mode is selected. The lamps reflect
the temperature of the water, so
more lamps come on as the
temperature gets lower.
Cold water mode lamp
Cold water temperature 3 step LED
1 2
When the hot water lock button is
pressed for three seconds, hot water
cannot be extracted, even by pressing
the hot water button, and an alarm
goes off.
Hot water lock button
The lamp goes on when the hot
water lock button is selected.
Hot water lock on
3 4
How to Use
Preparations Operation Part/Indication Part
/