Filter
Top Products
Model PNR™ Installation Instructions
4
Inspect The Unit Before Installing
WARNING: Watch for pinch points. Do not put your
fingers between movable parts.
1. Carefully inspect the PNR for shipping damage. If any
damage is apparent, call your carrier claims agent
and do not continue with the installation until the
carrier has reviewed the damage.
NOTE: Read all instructions before starting installation.
2. Lay out components to ensure you have all the
required parts before proceeding. See
“DIMENSIONAL DRAWING” on page 3.
SPECIFICATIONS
Table 1 provides the specificiations for the mount.
NOTE: *Dimension does not include the PSB interface
bracket.
INTERFACES
Table 2 lists the interface for the PNR.
TOOLS REQUIRED FOR INSTALLATION
• Allen wrench set
• Drill and bit set
• Wrench set
NOTE: Other tools may be required depending on the
method of installation.
PARTS LIST
Unpack the carton and verify the contents listed in Table
3. If you are missing any of the listed parts, contact
Customer Service at: 1-800-582-6480.
Table 1: Mount Specifications
Model Max Support Weight Mount
Extended
from Wall
PNR 200 lbs. (90.72kg) 25”*
Table 2: PNR Interfaces
Model Interface
PNR 14” x 14” Plasma Static Brackets (PSB)
Table 3: Parts List
REF DESCRIPTION QTY
10 PNR Wall Mount 1
20 Cover Plates 2
30 End Caps 4
40 Tiewraps 12
50 Lag Bolts, 3/8” x 2-1/2” 4
60 Flat Washers, 3/8” 4
— Wrench, Adjustment 1
— Bar, Adjustment 1