SKU 94282 For technical questions, please call 1-800-444-3353 PAGE 2
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
1.
2.
3.
PRODUCT SPECIFICATIONS
Electrical Requirements 120 VAC / 60 Hz / 8 Amp / 3 HP Peak
Power Plug 3-Prong, Grounded
Power Cord 18 AWG x 3 C x 100” Long
Power Switch 2-Position Rocker w/Clear Plastic Cover
Tank Capacity 5 Gallons
Air Flow Capacity 125 Cubic Feet @ 2
1
/
2
” Orifice
Additional Features Float Valve to Stop Wet Vacuuming When Tank is Full
Built-In Storage for Power Cord and Accessories
Four Swivel Casters
Accessories Three Extension Wands / One Crevice Tool
One Floor Nozzle / One Filter / One Dust Bag
Net Weight 11.7 Pounds