Filter
Top Products
SKU 94282 For technical questions, please call 1-800-444-3353 PAGE 13
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! Make sure the Power Switch (2) of the Vacuum Blower is in its
“OFF” position and the tool is unplugged from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures.
Before each use, inspect the general condition of the Vacuum Blower. Check for
misalignment or binding of moving parts, cracked or broken parts, damaged elec-
trical wiring, plugged Hoses or suction/blower Ports, and any other condition that
may affect safe operation. If abnormal noise or vibration occurs, have the problem
corrected before further use. Do not use damaged equipment.
After each use, empty the Tank (15) of the unit and check to make sure the Foam
Filter (107), Dust Bag (108), or Dry Filter (109) being used is cleaned and/or emp-
tied.
To clean the exterior parts of the Vacuum Blower and its accessories, use only
a clean cloth and mild detergent. Do not immerse any electrical part of the Vacuum
Blower in any liquids.
CAUTION! All maintenance, service, or repairs not mentioned in this
manual must only be performed by a qualified service technician.
1.
2.
3.
4.
5.
CREVICE TOOL
(106)
FLOOR NOZZLE
(104)
EXTENSION WAND
(105)
EXTENSION WAND
(105)
EXTENSION WAND
(105)
HOSE
(110)
SUCTION PORT
(13)
BLOWER PORT
(4)
POWER CORD
(30)
POWER SWITCH
(2)
FIGURE G