SKU 94282 For technical questions, please call 1-800-444-3353 PAGE 14
PARTS LIST
TROUBLESHOOTING
Problem Possible Solution
Power switch does not turn unit on. Make sure power plug is plugged into a working, 120 volt, grounded, electrical outlet.
Tank full of water. Empty tank.
Have a qualified service technician check out the power switch, wiring, and motor.
1.
2.
3.
Unit shuts down while in use. Prolonged use may cause temporary overheating of motor. Turn unit off, and allow unit
to cool down before restarting.
1.
Unit has suction, but does not clean
when hose or other attachments are
connected.
Hose and/or attachment may be cracked or damaged. Replace hose and/or attach-
ment.
Hose and/or attachment may be clogged. Remove hose and attachment from suction
port and connect to blower port. Then, blow out the hose and attachment.
1.
2.
Unit has no suction. Thoroughly clean suction/blower ports, foam filter, and dust bag.1.
Dust comes from the motor cover. Dust bag missing or damaged. Install or replace dust bag.1.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESS-
LY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARIS-
ING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Part Description
1 Handle
2 Power Switch
3 Upper Cover
4 Blower Port
5 Seal
6 Anti-Noise Foam
7 Air Block Board
8 Press Board
9 Waterproof Foam
10 Seal Ring
11 Clasp (Upper Part)
12 Clasp (Lower Part)
13 Suction Port
14 Suction Seat Press Board
15 Tank
Part Description
16 Caster
17 Caster Support
18 Tank Base
19 Cord Hook
20 Valve
21 Tray
22 Seal
23 Lower Cover
24 Inductor & Capacitor Set
25 Cord Anchor
26 Cable Sleeve
27 Air Block Board
28 Fence
29 Foam
30 Power Cord
Part Description
31 Air Outlet Foam
32 Air Outlet Foam Support
33 Motor Set
34 Sealing
101 Screw (ST4.2 x 16)
102 Screw (ST4.2 x 14)
103 Screw (ST4.2 x 16)
104 Floor Nozzle
105 Extension Wand (x3)
106 Crevice Tool
107 Foam Filter
108 Dust Bag
109 Dry Filter
110 Hose