Filter
Top Products
Page 5SKU 93188 For technical questions, please call 1-800-444-3353
Maintain a safe working environment. 5. Keep the work area well lit. Make sure there
is adequate surrounding workspace. Always keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use a power tool in areas near flammable
chemicals, dusts, and vapors
Always unplug the Drain Cleaner from its electrical outlet before performing any 6.
inspection, maintenance, or cleaning procedures.
Never leave the Drain Cleaner unattended while running. 7. Turn power off if you have
to leave the Drain Cleaner.
Before each use, check all nuts, bolts, and screws for tightness. 8. Vibration during
operation may cause these to loosen.
Avoid electrical shock. 9. Do not operate the Drain Cleaner if sitting in standing water,
and if the operator is in standing water. Keep extension cord off the ground and away
from water. Water increases the risk of electric shock.
Always connect the Line Cord to a Ground Fault Circuit Interrupter (GFCI) pro-10.
tected electrical outlet.
Install this product on a proper surface. 11. Locate on a flat, level, and solid surface
that is capable of supporting the weight of the Drain Cleaner.
Never operate the Drain Cleaner with the belt guard removed. 12. Fingers can get
caught between the drive belt and pulley.
Do not overstress cable. 13. Keep gloved hand on the cable for control when machine is
running. In the course of drain cleaning, if the cable encounters an obstruction, it may
stress the cable and cause the cable to twist, kink, or break. This may result in serious
injury, and damage the equipment or pipes.
Position Drain Cleaner within two feet of drain opening. 14. Greater distances can
result in the cable twisting or kinking.
For safest operation, the Drain Cleaner should be run only by the operator con-15.
trolling the Foot Switch and Cable.
Reversing the Motor direction should only be done when pulling the Cable out 16.
of the pipe, or off an obstruction. Trying to push the Cable down the pipe while in
reverse operation can result in Cable damage. Make sure Drum has stopped turning
before changin the Motor Direction Switch (5).
Keep hands away from the rotating Drum (38a) and Feed Pipe (42a). 17. Do not reach
into Drum unless the Drain Clean power cord is unplugged.
Avoid contact to eyes and skin of any drain cleaners that may have been used to 18.
unclog the drain previous to using the Drain Cleaner. These chemicals can burn
the eyes and skin. They may also damage the Cable.
Be aware of possible damage to drain lines that may result from the discovery 19.
of roots and other obstacles.
20. WARNING! People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart pacemaker