Filter
Top Products
Page 4SKU 93188 For technical questions, please call 1-800-444-3353
Use safety equipment. Always wear eye protection. 6. Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Tool Use and Care
Do not force the tool. Use the correct tool for your application. 1. The correct tool
will do the job better and safer at the rate for which it is designed.
Do not use the power tool if the Power Switch does not turn it on or off. 2. Any tool
that cannot be controlled with the Power Switch is dangerous and must be replaced.
Disconnect the Power Cord Plug from the power source before making any adjust-3.
ments, changing accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons. 4. Tools are
dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts, and any 5.
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model. 6.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Service
Tool service must be performed only by qualified repair personnel. 1. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions 2.
in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.
SPECIFIC SAFETY RULES FOR THIS PRODUCT
Maintain labels and nameplates on the Drain Cleaner. 1. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Always wear ANSI-approved safety impact eye goggles and heavy, leather work 2.
gloves when using the Drain Cleaner. Never grasp a rotating cable with a rag or
cloth glove. Using personal safety devices reduce the risk for injury. Safety impact eye
goggles and heavy work gloves are available from Harbor Freight Tools.
Avoid unintentional starting. 3. Make sure you are prepared to begin work before turn-
ing on the Drain Cleaner.
Do not force the Drain Cleaner. 4. This tool will do the work better and safer at the speed
and capacity for which it was designed.