Filter
Top Products
19
9.1A Close the door. Disconnect the
trolley by pulling the emergency
release handle.
9.2A Fasten the straight door arm and
the curved door arm together to the
longest possible length (with a 2 or 3
hole overlap) using the bolts (H15),
nuts (H20) and lock washers (H21).
9.3A Attach the straight door arm to the
door bracket using the clevis pin
(H13). Secure with the ring fastener
(H19).
9.4A Attach the curved door arm to the
trolley using the clevis pin (H14).
Secure with the ring fastener (H19).
9.5A Pull the emergency release handle
toward the garage door opener until
the trolley release arm is horizontal.
H20
H21
H15
H13
H19
H19
Connect the door arm to the trolley
9
HARDWARE
H15 (2)
Hex Bolt
5/16"-18x7/8"
H20 (2)
Nut
5/16"-18
H21 (2)
Lock Washer
5/16"-18
H14
Clevis Pin
5/16"x1"
H13
Clevis Pin
5/16"x1-1/4"
H19 (2)
Ring
Fastener
IMPORTANT: The groove on the straight
door arm MUST face away from the curved
door arm.
Straight
Door
Arm
Curved
Door
Arm
(Groove
facing out)
CORRECT
INCORRECT
Straight
Door
Arm
Curved
Door
Arm
ONE-PIECE DOORS
Option A
H14