Filter
Top Products
6
Opener Carton Inventory
Your garage door opener is packaged in two cartons which contain all parts illustrated below. If anything is
missing, carefully check the packing material. Parts may be "stuck" in the foam. Hardware for installation is
shown on page 7.
Straight Door
Arm Section
Door Bracket Plate
Door Bracket
Curved Door
Arm Section
Safety Labels
and
Literature
Header Bracket
UP
CEILING MOUNT ONLY
Safety Reversing Sensor
Mounting Bracket
With Square Holes (2)
"C" Wrap (2)
Safety Reversing Sensor
Mounting Bracket
With Slot (2)
Sprocket Cover
2-Conductor Bell Wire
White & White/Red
LIGHT
LOCK
Multi-Function Door
Control Panel
Lighted Door Control Button
w/6ABx1-1/2" screws
Light Lens (1)
Light Lens (2)
Remote Control
Transmitter Visor Clip
Chain Spreader with
Screws and Washers
One-Piece
T-rail
Styrofoam
Chain
Pulley Bracket
(Models 1260, 1260-266,
1260-166, 1250 &1250-266)
(Models 1256, 1255, 1255-266,
1255-166, 1246, 1245, 1245-266, & 1240)
(Models 1260, 1260-266,
1260-166, 1250 & 1250-266)
(Models 1256, 1255, 1255-266,
1255-166, 1246, 1245, & 1245-266)
(Models 1256 & 1246 only)
Keyless Entry
(Models 1260-266, 1260-166, 1255-266,
1255-166, 1250-266 & 1245-266 only)
Remote Control
Transmitter
with 12V battery
(Models 1260-266 &
1255-266 (2)
All Other Models (1))
(All Models except
1256 & 1246)
Trolley
Chain
Safety Reversing Sensor (2)
(1) Sending Eye
(1) Receiving Eye
2 Conductor Bell Wire with Connector
White & White/Black (2 rolls)