Filter
Top Products
12
10000801
Vermont Castings, Majestic Products RHEDV Direct Vent Insert
SR2
SR5
SR6
SR4
SR3
SR1
Front Lava Rock Placement
LG281
Fig. 20 RHEDV42 log and lava rock placement.
Large Lava Rock Placement
The large lava rock provided with this fireplace must be
placed on the firebox base on either side of the burner
assembly.
Under no circumstances should these
lava rock be placed on top of the burner
assembly.
Flame Adjustment (RN/RP Models)
For fireplaces equipped with HI/LO valves, flame
adjustment is accomplished by rotating the HI/LO
adjustment knob located near the center of the gas
control. (Figs. 21 or 22)
LO
HI
Turn
counterclockwise
to decrease
flame height
Turn clockwise
to increase
flame height
Fig. 21 Flame adjustment knob for Honeywell Valve.
Honeywell Valve
L
O
H
I
Turn
counterclockwise
to increase
flame height
Turn clockwise
to decrease
flame height
SIT Valve
Fig. 22 Flame adjustment knob for SIT Valve.
Temperature Adjustment (TN/TP Models)
The HI/LO reference on the control knob (Fig. 23) is to
indicate a higher or lower temperature setting. This
setting controls the heat by reducing then shutting off
the flame as the desired temperature is reached.
Position the control knob where it effectively maintains
a comfortable room temperature.
Fig. 23 Temperature adjustment knob for TN/TP models.
It is important to periodically perform a visual check of
the pilot and the burner flames. Compare them to the
Figure 24 and Figure 25 or 26. If any of the flames
appear abnormal call a service person.
Flame Characteristics
JR5
JR6
JR2
JR4
JR3
JR1
Burner Lava Rock
Placement
LG279
Fig. 18 RHEDV25 log and lava rock placement.
KR5
KR2
KR6
KR4
KR3
KR1
Burner Lava Rock
Placement
LG280
Fig. 19 RHEDV32 log and lava rock placement.