Filter
Top Products
44
Radiance Direct Vent/Natural Vent Gas Heater
20004188
29"
(7.6cm)
31"
(7.9cm)
7" Outer Dia.
(1.8cm)
4"
(1.2cm)
14"
(3.7cm)
ST126
RDV40 dimensions
10/99
28"
(711mm)
5"
(127mm)
9"
(241mm)
18"
(464mm)
Supply
Inlet
See Page 6 for Flue Collar
Centerline Dimensions.
4188
Fig. 1 Radiance dimensions.
Radiance Direct Vent/Natural Vent Stove Dimensions
Attention
The Radiance stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be converted
into a Natural Vent unit in the field. If a Natural Vent Heater is desired, the Vermont Castings Z31D00 FSD-
HAG Draft Hood must be directly installed to the top of the unit according to the installation instructions.
The Draft Hood Adapter is available in the 7FSDHASK stove kit or as a separate item.
When the Radiance stove is converted to Natural Vent, it uses 4” vent pipe. For aesthetic purposes the CFM
direct vent system may be used up to the ceiling.