Filter
Top Products
13
Dutchwest
7001219
Distance from Center of Flue Collar to Wall in Top-Exit Installations
Dutchwest Convection Heaters equipped with rear heat shields
NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue collar will be for
various installations. Measurements are from the centerline of the flue collar to the wall, not the wall protector.
ST427
dutchwest
flue center
line
6/30/00 djt
A
B
C
E
D
F
ST427
Unprotected Surfaces Protected Surfaces
Side (A) Rear (B) Corner (C) Side (A) Rear (B) Corner (C)
Double-wall 33” 18” 25” 23” 10” 15”
Chimney Connector (838 mm) (457 mm) (635 mm) (584 mm) (254 mm) (381 mm)
Single-wall connector 33” 13” 22” 23” 11” 15”
connector h.s. (838 mm) (330 mm) (559 mm) (584 mm) (279 mm) (381 mm)
Single-wall connector 33” 23” 25” 23” 13” 17”
no heat shields (838 mm) (584 mm) (635 mm) (584 mm) (330 mm) (432 mm)
Heater Installed with
Rear Heat Shield and: