Filter
Top Products
20
4 Thermostat mode is Cool
5 Thermostat mode is Heat
6 Thermostat mode is emergency heat
7 Fahrenheit
8Celsius
9 Battery strength indicator
10 Aux Heat is On
11 Compressor is On ( if flashing, it is waiting to come on)
12 Current setpoint (if configured to display room temp)
Setting the temperatures for heating and cooling
Your thermostat is installed with the heating set at 68_F and the cooling set at
72_F. You can use these or change them so your room is as warm or as cool as
you would like it to be. These steps will hold the temperature where you set it.
1. To change the heating temperature, press the mode button on the left until
the screen says heat.
2. Press the up or down button located on the right side of the display until
you reach the desired temperature.
3. To change thecooling temperature, press the mode button on the left until
the screen says cool.
4. Press the up or down button located on the right side of the display until
you reach the desired temperature.
Using the fan
When the fan is on, it helps distribute air for a more even temperature in all
spaces. You can set the thermostat so the fan runs continuously (on) or only