Filter
Top Products
4-35
VB Administration Tools
Timer Setting Tool
The section below describes the “picture recording” function which takes still images at specified
times and records them in the VB-C50Fi.
Timer Setting Tool Display Screen
q “Load Settings” button
Loads the timer settings currently set in the VB-C50Fi.
w “Save Settings” button
Saves the timer settings edited using this Tool.
After setting the timer function, be sure to click the “Save Settings” button to save the
settings.
e “Stop Communication” button
Click this button during communication with the VB-C50Fi to cut the connection.
r Timer Setting box
Select the setting number you want to use.
t Capture still images
Check to capture images at the set repetitive intervals and record to the VB-C50Fi. Set Camera
Preset, Camera Stabilization Time and Repetition Interval below.
y Camera Preset
Select a zoom position while recording picture. Select from “Does not specify” or from preset
names already set.
u Camera Stabilization Time
Starts capturing images after waiting for the specified time for the camera to stabilize after
moving. The maximum time is 10 seconds.
i Repetition Interval
Sets the interval between repeated image recording. Repetition Interval can be set to a maximum
of 23 hours, 59 minutes and 59 seconds. Also, if you set Repetition interval to 0 seconds, a still
image is only recorded once.
qwe
y
r
t
u
i
Schedule Setting Tool
o
!2
!0
!1