Filter
Top Products
Creating Web Pages
5-31
Log Messages
Message
Explanation
Response
●A008 Compatibility error in the view restrictions settings (warning)
unacceptable view restriction for camera[1]
Set appropriate values for the view restrictions.
Even in the telephoto field of view, the view restriction settings cannot be
satisfied in the horizontal or vertical direction. When this occurs, the zoom
setting is fixed at the telephoto field of view, and camera head control is
prohibited in directions that do not satisfy the permitted field of view restrictions.
Message
Explanation
●A010 Camera control driver start and stop (info)
%1 driver for camera[1] %2
The camera control device was detected and the driver started up, or a
camera control device error was detected and the driver stopped.
%1
Camera type (Canon VB-C50Fi)
%2
started | stopped
Message
Explanation
●A011 Camera control device error (warning)
%1[1] malfunction (%2)
Camera control device I/O error.
%1
Camera type (Canon VB-C50Fi)
%2
Error (read | write | timeout | ...)
Response
There is a malfunction if it occurs repeatedly. Contact an authorized Canon
service representative.
Message
Explanation
●A012 WebView Livescope client start and stop (info)
%1@%2 %3
Connection and disconnection of TCP version WebView client (LS/D) and
HTTP version WebView client (LS/H) excluding still images.
%1
Client type (LS/D | LS/H)
%2
Client host IP address
%3
connected | closed
Message
Explanation
●A014 Access prohibited due to host restriction (notice)
LS@%1 access denied
Access from the client was denied due to host restrictions.
%1
Client host IP address