Filter
Top Products
22
Message
Cause
Action to
be taken
(10) When switching to appropriate camera failed during assignment
An attempt was made to assign a camera that is different from the camera
being viewed by a client with control rights of a higher level than yourself.
Could not switch camera.
Ask the other client to release the control privilege.
Message
Cause
Action to
be taken
(11) Power to the camera is turned off or there is a malfunction
Power to the camera is off, or a cable is not properly connected.
Camera is switched off or faulty.
•Turn on power to the camera.
• Connect the cable.
Message
Cause
Action to
be taken
(12) Incorrect address
Network connection was cut, power to the camera server was cut, or the proxy
settings are not correct.
Could not connect to the camera server.
• Re-connect to the network.
•Turn on power to the camera server.
• Redo the proxy settings.
Message
Cause
Action to
be taken
(13) Connection restrictions at the camera server
Access restrictions have been set at the camera server.
Your computer is not authorized to access the camera server.
Release the access restrictions.
Message
Cause
Action to
be taken
(14) Maximum allowed number of camera server connections has been exceeded
The number of access to the camera server has been reached.
Number of accesses to the camera server has reached to the maximum.
Tr y accessing the camera server later.