Filter
Top Products
18
8 Options
Option in the Operation menu lets you make Video Relay and HTTP settings.
Setting the Video Relay
Since only one viewer among a number of viewers can be used to display live video, Video Relay
automatically switches from more than one camera connected to a single camera server. The use of this
function can avoid clicking manually on individual viewers to switch video display.
From the Operation menu, choose Option. In the Interval field
of the Video Relay, enter a value between 5 and 30 to specify
the number of seconds for the auto display interval. Click OK
when finished.
e
Tip
● Video Relay operates constantly when a viewer is not selected.
● Video Relay is valid only during 4 Viewers display.
● Video Relay cannot be used with the VB-C10/VB-C10R.
● When the VB150 is being used and the Video Input (
→ →
→ →
→ VB150 User’s Manual
P.40) is set to Multiple, all four viewers can display video images at the
same time during 4 Viewers display. Therefore, you do not need to set the
Video Relay.
● Video Relay may be unavailable when motion detection is enabled on the
VB150.
Setting HTTP
The HTTP Proxy and the HTTP port No. for connection to the camera server can be set in the HTTP
settings. These settings enable connection through a firewall.
From the Operation menu, choose
Option. In the “HTTP port for
communicating with the camera
server” field of the HTTP, enter the
HTTP port No. If you need the proxy
settings, click the HTTP Proxy button
to display the Proxy Settings window.
Enter the settings required for the
proxy. Click OK when finished.