Filter
Top Products
CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and
Needle Chart
Changing
Presser Feet
Basic
Sewing
Caring for
Your
Machine
Trouble
Shooting
13
Basic Sewing (1)
Basic Sewing
1 Lift foot, pull about 15cm of upper
and bobbin thread under and behind
foot, and position fabric under foot.
2 Lower foot.
3 While needle is pierced all the way
through fabric, step gently on foot
controller.
4 Raise needle to highest position.
5 Lift foot, remove fabric and cut
thread.
✽ When using thread trimmer:
4 Push thread trimmer button (this will
cause the upper and bobbin threads
to be cut automatically and the
needle to stop in a raised position.)
5 Lift presser foot and remove fabric.
1 Make sure needle is pierced all the
way through fabric.
2 Lift presser foot, and turn fabric using
needle as an axis.
3 Lower foot and continue sewing.
✽ At the beginning of a seam, sew a
few stitches with the hand wheel, hit
the reverse stitch button and sew a
few stitches back to reinforce your
seam, then go back to normal sewing
and finish the seam. Do the same at
the end of a seam.
Pin Feeding (for hard-to-handle fabrics)
✽ The above fabrics
can be sewed
neatly by sewing
by pin feeding.
1 Move feed adjustment knob
to pin feeding position.
2
Adjust pressure adjust-
ment dial until indicator
needle is in the right posi-
tion.
3 Gently pull thread until feed pin
catches fabric and sew.
Pin Feeding Unit
The feed pin passes up through all layers of fabric moving with the feed dog's motion
to feed all layers of the fabric evenly.
✽ Feed pin is automatically lowered when presser foot is raised.
Reinforcement stitches
1cm
1cm
Fabric:
Velvet
Synthetic Suede
Others
Fabric
Feed Pin
Feed Dog
✽
When changing sewing directions.
Feed Pin
Before
sewing.
Begin
sewing.
Finish
Sewing.
Indicator Needle
N