Filter
Top Products
49
Contents Setting Up
Basic Sewing
Machine
Operation
Utility Stitches Embroidering Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
5. Press the “START/STOP” button to start the machine, while
gently holding the end of the upper thread.
* Gently, feed the fabric by hand.
* The machine will stop with a reinforcement stitch automati-
cally after sewing is completed.
* Use a courser stitch density when sewing on heavyweight
fabrics and other difficult fabrics.
3
5
6. Insert a pin in front of the inside edge of both bar tacks. Insert
the seam ripper into center of buttonhole. Cut towards the first
pin. Then cut toward the other pin.
1 Pin
Order of one cycle
1
*
*
*
* Reinforcement stitch
1 2 3 4 5
1 2 3 4 5
7 8
1 2 3 4 5
6
6 7 8 9