Filter
Top Products
36
Contents Setting Up
Basic Sewing
Machine
Operation
Utility Stitches Embroidering
Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
STRAIGHT STITCHES
1 Straight (Left)
2 Straight (Middle)
UTILITY STITCHES
12
J
1. Attach the J foot. Handle thread and fabric with your left hand
while turning the balance wheel with the right. Pierce the nee-
dle through the fabric as shown.
3
5
3
5
4. Raise the presser foot, remove the fabric and cut the thread.
2. Lower the presser foot. While pressing the reverse stitch but-
ton, sew 3-4 stitches in reverse to make a reinforcement stitch.
Then release the “REVERSE STITCH” button and press the
“START/STOP” button to begin sewing.
1 Reinforcement stitch (3-4 stitches)
3. At the end of a seam, press the “REVERSE STITCH” button
again to sew another reinforcement stitch.
* Reverse stitches are sewn while the “REVERSE STITCH”
button is pressed.
* Sewing in reverse is carried out at a slow sewing speed.
1