Filter
Top Products
Cover A
Enclosed Accessories
After opening the box, check that the following accessories are enclosed. If any item is missing or
damaged, contact your retailer.
Accessories
The following items should also be enclosed in the box.
Note
(For U.S.A. only)
z Foot controller: Model N5V This foot controller can be
used on this machine model NX-600.
z Screw of the presser foot holder (Part code: XA4813-
051).
z Organized accessory tray (Part code: XC4489-051)
1. 2. 3. 4. 5. 6. 7.
8.
9.
10. 11. 12. 13. 14.
15.
16. 17. 18. 19.*
20.
21. 22. 23. 24. 25. 26. 27.
28.
29.
30.
31.
32.
33. 34.
35.
*75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot "A" XC2691-051 19 Needle set X58358-051
2 Overcasting foot "G" XC3098-051 20 Twin needle X59296-051
3 Monogramming foot "N" X53840-351 21 Cleaning brush X59476-051
4 Zipper foot "I" X59370-051 22 Eyelet punch 135793-001
5 Zigzag foot "J" (on machine) XC3021-051 23 Screwdriver (large) X55467-051
6 Blind stitch foot "R" X56409-051 24 Screwdriver (small) X55468-051
7 Button fitting foot "M" 130489-001 25 Spool cap (large) 130012-054
8 Walking foot SA140 F033N (XC2214-002) 26 Spool cap (medium)(2) X55260-153
9 Quilting foot SA129 F005N (XC1948-002) 27 Spool cap (small) 130013-154
10 Stitch guide foot "P" SA160 F035 (XA8839-002) 28 Extra spool pin XC4654-051
11 Adjustable zipper/piping foot SA161 F036N (XC1970-002) 29 Spool net XA5523-050
12 Non stick foot SA114 F007N (XC1949-002) 30 Foot controller XC1154-051
13 Open toe foot SA147 F027N (XC1964-002) 31 Grid sheet set SA527 GS4 (XC4549-051)
14 1/4 inch quilting foot SA125 F001N (XC1944-002) 32 Knee lifter XA6941-052
15Side cutterSA177F054 (XC3879-002)33Operation manualXC5427-051
16Quilting guideSA132F016N (XC2215-002)34Quick reference guide
XC4546-151,
XC5434-051
17 Seam ripper X54243-001 35 Hard case XC2360-152
18 Bobbin (4) SA156 SFB (XA5539-151)