Filter
Top Products
APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
140
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Maintenance
Simple sewing machine maintenance operations are described below.
Cleaning the machine surface
If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a wet cloth, wipe it again with a dry
cloth.
CAUTION
Cleaning the shuttle
Sewing performance will suffer if dust collects in the
shuttle; therefore, it should be cleaned periodically.
a
Turn off the sewing machine.
CAUTION
b
Grasp both sides of the needle plate cover, and
then slide it toward you.
a Bobbin cover
X The needle plate cover is removed.
c
Turn the balance wheel toward you until the
tip of the shuttle hook aligns with the edge of
the race shelf.
a Shuttle race
b Shuttle
c Edge of the shuttle race
d Tip of the shuttle hook
● Unplug the power supply cord before
cleaning the machine, otherwise injuries
or an electric shock may occur.
● Unplug the power supply cord before
cleaning the machine, otherwise injuries
or an electric shock may occur.
1
3
1
2
4