Filter
Top Products
42
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 2 - 5.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the DCP.
(See Optional accessories in Chapter 15 of
the User's Guide.)
2
Switch off and unplug the DCP from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
3
Turn on your Macintosh
®
.
4
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
5
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
6
Click the MFL-Pro Suite for your country to
install.
7
Select Network Interface, and then click
Install.
8
After the installation is completed, restart
your Macintosh
®
.
9
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
0
Turn on the DCP by plugging in the power
cord. Turn the Power Switch on.
For Network Interface Cable Users
For Mac
®
OS 8.6 to 9.2
Step 2