Filter
Top Products
10. DIP SWITCH
BAS-311F-0, 311F-L, 326F-0
56
10-2. DIP switches inside the control box
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the face plate of the control box. Touching areas where high voltages are present can result in
severe injury.
DIP Switch C
SW No. When ON
C-1
-
C-2
-
C-3
-
C-4
Controlled sewing area becomes 1200 mm X 400 mm
C-5
For pneumatic type, set to ON when the connection has been changed so that the work clamp
remains raised when the power is turned off.
C-6
When using an air-driven intermittent work clamp
C-7
-
C-8
-
1280S
Main circuit board