Filter
Top Products
3. INSTALLATION
BAS-311F-0, 311F-L, 326F-0
8
3-8. Installing the machine head
1. Insert the head hinges (1) into the machine head so that they are parallel, and then secure them with the two set
screws (2).
2. Place the machine head gently on top of the rubber cushions (3) and cushions (4).
Note
Poll the cords (5) out as shown in the illustration above in order to prevent them from being clamped by the machine
head.
3. Install the hinge presser (6) with the two bolts.
4. Check that the head position switch is turned on as shown in Figure 1.
5. Connect the motor cord connector (8) to the accessory cord connector (9).
1 163S
(2)
1 164S 1 165S
(1)
(6)
14.5m
133m
13.2m
(4)
(5)
(8)
(9)
(3)
(5)
Fig. 1