Filter
Top Products
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
B-15
No. Part Name
Part Code
Americas Others
1 Zigzag foot “J” (on machine) XF3022-001
2 Monogramming foot “N” X53840-351
3 Overcasting foot “G” XC3098-051
4 Zipper foot “I” X59370-051
5 Buttonhole foot “A” X57789-251
6 Blind stitch foot “R” X56409-051
7 Button fitting foot “M” 130489-001
8 Straight stitch foot SA167 F042N:
XC1973-052
9 Free motion quilting foot “C” XF4737-001
10 Free motion echo quilting foot
“E”
XE0766-001
11 1/4” quilting foot with guide SA185 F057:
XC7416-252
12 Free motion open toe quilting
foot “O”
XF4873-001
13 Dual feed foot DF1: XF4166-001 (EU area)
XF3165-001 (other area)
14 Adapter XF3613-001
15 Screw (small) XA4813-051
16 Needle set X58358-051
17 Twin needle X59296-151
18 Bobbin × 10
(One is on machine.)
SA156 SFB:
XA5539-151
19 Seam ripper XF4967-001
20 Cleaning brush X59476-051
21 Eyelet punch XZ5051-001
22 Screwdriver (small) X55468-051
23 Screwdriver (large) XC4237-021
24 Disc-shaped screwdriver XC1074-051
25 Vertical spool pin XC8619-052
26 Spool cap (small) 130013-154
27 Spool cap (medium) × 2
(One is on machine.)
X55260-153
28 Spool cap (large) 130012-054
29 Spool cap (special) XA5752-121
30 Bobbin clip × 10 XE3060-001
31 Spool felt (on machine) X57045-051
32 Spool net × 2 XA5523-050
33 Touch pen (stylus) XA9940-051
34 Knee lifter XA6941-052
35 USB cable XD0745-051
36 Bobbin case (gray, for bobbin
work)
XE8298-001
37 Straight stitch needle plate XF3076-001
38 Cord guide bobbin cover
(with single hole)
XE8991-101
39 Bobbin cover (with mark) XF0750-101
40 Bobbin cover (on machine) XE8992-101
41 Foot controller XD0501-151(EU area)
XC8816-051 (other area)
42 Wide table SAWT6200D
(U.S.A.)
SAWT6200DC
(Canada)
WT10:
XF4184-001
43 Grid sheet set SA507 GS3:
X81277-151
44 Sensor pen XF4992-001 (EU area)
XF3116-001 (other area)
45 Pen holder XF2973-001
46 Dust cover XF4569-001
47 Accessory bag XC4487-021
48 Operation manual This manual
49 Quick Reference Guide XF3634-001
50 MY CUSTOM STITCH CD* XE8901-001
Memo
• Foot controller: Model T
This foot controller can be used on the
machine with product code 882-D00. The
product code is mentioned on the machine
rating plate.
• Always use accessories recommended for
this machine.
• Placing bobbin clips on bobbins helps
prevent the thread from unwinding from the
bobbin. In addition, snapping bobbin clips
together allows the bobbins to be
conveniently stored and prevents them from
rolling around if they are dropped.
• Included accessories may vary depending
on the country or region.
No. Part Name
Part Code
Americas Others