Filter
Top Products
SEWING THE STITCHES
S-30
reinforcement stitch and trim the thread
automatically at the end of sewing.
a About 12 mm (approx. 1/2 inch)
b Wrong side
c
Spread the fabric out along the finish line.
a Finish line
b Wrong side
d
Lay both seam allowances on the side of the
shorter seam (cut seam) and iron them.
a Wrong side
e
Fold the longer seam allowance around the
shorter one, and sew the edge of the fold.
a Wrong side
Finished flat fell seam
a Surface
Pintuck
a
Mark along the folds on the wrong side of
the fabric.
a Wrong side
b
Turn the fabric and iron the folded parts
only.
a Surface
c
Select and attach presser foot “I”.