Filter
Top Products
NARROW HEMMING
By using narrow hemmer foot a neat scroll type hem
is made.
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
1. Cut top corner of the material about
0.3cm (1/8”).
2. Place material wrong side up and insert
cut off angel into foot opening.
3. Pull material by hand from the back of
the presser foot.
Make sure the needle is positioned over
material.
Lower presser foot.
4. Make sure upper and lower threads are
placed behind presser foot.
5. Sew at medium speed. Guide the
material by hand through the presser foot
opening.
NOTE: With zigzag width lever set a 3,
zigzag narrow hemming can be done
following the above procedure.
-30-