Filter
Top Products
2. Straight Stitching
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
HOW TO START SEWING
1. Raise needle to its highest position and
lift presser foot.
2. Place material under presser foot and
position needle about one half inch
(10mm) from material edge.
3. Lower presser foot.
4. For reverse sewing push Reverse Sewing
button sewing is used wherever
reinforcement is needed.
5. Release Reverse Sewing Button and start
sewing in forward position.
NOTE: Do not pull the material. Let the
machine do the work. Merely guide
the material with your fingers. If
you pull the material, your needle
might either bend or break.
HOW TO CHANGE THE SEWING
DIRECTION
1. Stop machine at the turning point while
the needle is in the material.
2. Raise the presser foot and turn the
material to the new direction while the
needle acts as the axis.
3. Lower presser foot and sew in new
direction.
-17-