Filter
Top Products
4. ASSEMBLY
KE-430B, 430C series
66
Tighten the screws so that the
presser solenoid assembly protrudes
by 110.0 ± 0.2 mm from the edge of
the arm.
Lastly, move the work clamp lifer link-related parts by
hand and check that they move smoothly.
3352Q
Seen from above
3353Q
11. Screws [2 pcs]
12. Screws [4 pcs]
13. Rubber caps [2 pcs]
14. Link shaft, D
15. Snap pins [2 pcs]
16. Guide
17. Screws [2 pcs]
18. Springs [2 pcs: Hook onto link shaft B and the grooved pins (18)]
19. Oil cap
20. Rubber cap