Brother 433B Sewing Machine User Manual


 
5. ADJUSTMENT
-28. Work clamp interchangeability (KE-433B)
The KE-430B, 430C work clamp can also be used
with the KE-433B.
Remove the screw (1), washer (2) and cover
support stand (3), and then change the installation
position for the work clamp arm assembly (4) from
the standard installation position A to installation
position B.
3503Q
-29. Work clamp interchangeability
(KE-434B, 434C, 435B, 435C, 436B, 436C, 484C)
The work clamp for the BAS-311F can be used.
Replace the feed bar guide cover (1) with the feed
bar guide cover assembly, LL (2) (optional).
Then, change the installation position for the
presser arm assembly (3) from the standard
installation position A to installation position B.
To alternate use between the normal work
clamp and the BAS-311F work clamp
Use the optional work clamp 434EMK2 air (5) with
the work clamp (4). It can then be used
interchangeably with the BAS- 311F work clamp (6)
at installation position B.
2619
Q
3504Q
KE-430B, 430C series
131