Brother 430C Sewing Machine User Manual


 
4. ASSEMBLY
KE-430B, 430C series
73
While pressing the set collar,
tighten the set screw at the
screw stop position.
Place the feed cam bracket
onto the positioning pins, and
then install with the screws.
3371Q
Apply grease.
1) Place the coupling spacer onto coupling hub 8.
2) Set coupling hub 8 on the pulse motor shaft at the
angle for inserting the coupling spacer, and install
the pulse motor to the machine bed.
Apply grease.
* Make sure that the harness faces correctly.
Apply grease.
3370Q
10. Ball bearing [Insert into the bed]
11. Coupling spacer
12. Pulse motor assy, X
13. PM bracket, X
14. Bolts [4 pcs]
15. Positioning pins [2 pcs]
16. Y-feed cam bracket
17. Screws [2 pcs]
18. Ball bearing
19. Coupling spacer
20. Pulse motor assy, Y
21. PM bracket, Y
22. Bolts [4 pcs: 3 pcs for KE-484C]
23. Set screw collar
24. Set screws [2 pcs]