Brother 430C Sewing Machine User Manual


 
3. DISASSEMBLY
-. Work clamp arm mechanism (BE-438B, 438C)
3280Q
Be careful not to drop these two bearing balls
when removing the feed bracket assembly.
3281
Q
Remove the feed bracket
gui
de plate and the feed
bracket assembly together
as a single unit.
1. Set screw
2. Ne
edle
3. Needle bar thread guide
4. Nuts [2 pcs]
Adjusting screw
Compression spring
[Push upward and remove horizontally]
5. Set screws [2 pcs: Loosen]
6. Button clamp holder shaft
15. Tack width feed shaft
16. Rod end
17. Screws [8 pcs]
18. Feed bracket guide plate
19. Feed bracket assy
7. Butto
n clamp holder
8. Bolts [2 pcs]
9. Button clamp holder support
10. Work clamp felt
11. Screws [2 pcs]
20. Fl
at screws [2 pcs]
12. F
eed plate
21. S
crews [2 pcs]
22. Needle plate
13. Ru
bber cap
14. Set screw [Loosen]
KE-430B, 430C series
29