Brother 430C Sewing Machine User Manual


 
7. OPTIONAL PARTS
Thr
ead breakage detector (KE-436*) 2-step thread tension device (KE-436*)
The emergency stop is activated to warn the operator
when a thread breakage is detected. Both rotary-type
and beam-type detectors are available.
This allows the upper thread tension to be switched
between two settings at any position desired by using
the programmer.
Needle cooler (KE-436*) Air wiper (KE- 436*)
This is a pneumatic type needle cooler which prevents
the thread breakage due to heat. It is particularly
useful when sewing thicker materials and when
sewing at high speeds.
The thread wiper is driven by a pneumatic cylinder. It
can be used when the thread cannot be pulled out
from the material when sewing extremely thick
materials.
Programmer (KE-436*)
PS-3000 Programming software for electronic
pattern sewer
This is a software program which creates new sewing
patterns using a personal computer.
Sewing date can be created, edited and saved.
<Rotar
y
-type> <Beam-type>
3578
Q 3579Q
3580Q 3581Q
3582
Q
KE-430B, 430C series
137