Filter
Top Products
TROUBLESHOOTING
ISSUE POSSIBLE CAUSE SOLUTION
Unit does not mist.
Unit is not plugged in.
Power failure.
Water tank is empty.
Power switch not
turned on.
Unit still on REFILL
after refilling tank.
Float on bottom
of tank “hangs up”.
Water tank not properly
situated on base.
Humidity level
set is achieved.
Plug in unit.
Check circuit breaker.
Remove and refill water.
Turn on switch.
Check that there is water
in the hot water reservoir.
Carefully clean any
residue or obstruction.
Reposition
water tank.
Turn relative humidity
control to higher setting.
19