Filter
Top Products
8. Take a replacement 3.5W UV bulb that you purchased from Kaz Incorporated or another
supplier and change the bulb. To prolong the life of the bulb, limit your direct contact
with the glass of the bulb by using a cloth or tissue to screw it into place. Mail questions
or comments to: Kaz, Incorporated, Consumer Relations Dept., 250 Turnpike Road,
Southborough, MA 01772. Please be sure to specify model number. Call toll-free at:
800-477-0457; E-mail: consumerrelations@kaz.com; or visit the website at:
www.kaz.com. Purchase replacement mineral absorption pad part number EMP-17P
or replacement bulb part number EUV-13B.
9. When the new bulb is in place, close the door and replace the screw(s) by using
your Phillips-head screwdriver and rotating it clockwise until it is just tight.
DO NOT OVER-TIGHTEN.
10. DO NOT turn power on while UV Lamp Door is open, and do not view illuminated
bulb directly as it may cause eye damage.
11. Turn the unit upright, place the WATER TANK on top of the base of the humidifier,
plug the unit in, and push POWER/MODE switch to either the HI or LO position.
The REPLACE UV BULB indicator should no longer be lit.
636126_INS0210_GermFreeHumidifier_5”Wx4.75”H_Output:100%_Prints:1/1,Blk
Example of replacing
the lightbulb.
16