WARNING: DO NOT use any liquid medication other than those specifically
recommended for use with a steam vaporizer or warm mist humidifier.
DO NOT pour medication directly into the MIST OUTLET GRILLE openings
nor add it to the water in the tank or tray.
MINERAL ABSORPTION PAD INSTRUCTIONS
Warm mist humidifiers do not spread fine mineral dust into the air that you breathe nor
onto your furniture, the way that other types of humidifiers do. The mineral dust remains
trapped in the humidifier's hot water reservoir. Use of Mineral Absorption Pads will play
a major role in capturing and removing minerals from the hot water reservoir, preventing
a stubborn mineral buildup. The unit can run without pads, but more frequent cleaning
will be required. The mineral absorption pad for this unit is EMP-17P.
1. Before starting humidifier, place mineral absorption pad in the hot water reservoir.
After the humidifier has been operating, the water will become HOT, and CAUTION
should be exercised when handling mineral absorption pad. It is best to allow humidifier
water to cool down, and to use tongs or long tweezers when handling pad.
2. The useful life of the mineral absorption pad will vary, depending on the mineral content
of the water used. In areas of moderate mineral content, the mineral absorption pad
should be changed after approximately (3) weeks of continuous use. If the water is
“Hard Water”, the pad should be changed more frequently. The best way to tell when the
pad should be changed is to examine it AFTER the water has cooled down, to see if it
is still soft and pliable. When the pad is near the end of its life, it becomes stiff and hard
and should be replaced with a new pad. Another sign you need to change the pad is
when scale begins to build up on the interior of the hot water reservoir.
636126_INS0210_GermFreeHumidifier_5”Wx4.75”H_Output:100%_Prints:1/1,Blk
12