Brookstone BWM-2110 Humidifier User Manual


 
FILLING THE WATER TANK
REFILL WHEN LIT—When illuminated, the water tank needs refilling. “REF” will also
be indicated in the MODE window at this time. If still illuminated after full tank is
placed on base, see TROUBLESHOOTING section.
1. Before filling the WATER TANK, push POWER/MODE switch until OFF
appears in MODE window and unplug unit.
2. Remove WATER TANK from base, turn the tank upside down and remove
TANK CAP by turning counterclockwise. Fill tank with clean, cold tap water.
Replace the TANK CAP by turning clockwise. Tighten firmly.
3. Carefully pick up tank, since it will be heavy when full, and slippery if wet.
4. Place WATER TANK on base. Make sure tank is properly seated, otherwise
the humidifier will not work correctly.
USING THE MEDICATION CUP/MIST
OUTLET GRILLE (OPTIONAL)
In order to add a medicated vapor to the mist output:
1. Press POWER/MODE switch to the OFF position and allow the outlet grille to cool.
2. Lift the MEDICATION CUP.
3. Carefully add liquid medication. DO NOT fill the cup more than half full.
4. Carefully replace the MEDICATION CUP.
5. Press POWER/MODE to either the LO or HI position.
6. After use, remove the cup from the unit and clean any residue
from the cup with warm water.
11