Brada Appliances MPN1-10CR Air Conditioner User Manual


  Open as PDF
of 24
 
TROUBLESHOOTING TIPS
TROUBLESHOOTING
1.Unitdoesnot
Startwhen
Pressingon/off
Button
TROUBLES
POSSIBLECAUSES
SUGGESTREMEDIES
Resetthetemperature.
Makesureallthewindowsand
doorsareclosed.
Removetheheatsourcesifpossible.
Connecttheductandmake
sureitcanfunctionproperly.
Decreasethesettemperature.
Cleantheairfilter.
-Roomtemperatureislowerthan
thesettemperature.(Coolingmode)
- Thewindowsordoorsintheroom
arenotclosed.
- Thereareheatsourcesinsidethe
room.
-Exhaustairductisnotconnectedor
blocked.
- Temperaturesettingistoohigh.
- Airfilterisblockedbydust.
2.Notcoolenough
Placetheunitonaflat,level
groundifpossible.
Itisnormal.
- Thegroundisnotlevelornotflat
enough.
- Thesoundcomesfromtheflowing
oftherefrigerantinsidethe
air-conditioner.
3.Noisyorvibration
4.Gurglingsound
-P1appearsinthedisplaywindow
Drainthewaterinthebottomtray.
16
 previous next