Filter
Top Products
EN | 72 Installation and Operating Manual | VIP X2
Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5
SSL encryption:
SSL encryption can be used to protect data, such as the password, used for con-
nection establishment. If you activate the On option, only encrypted ports are
available for the Remote port parameter.
Note
SSL encryption must be activated and configured on both sides of a con-
nection. The appropriate certificates must also have been uploaded to the
VIP X2 (see page 99).
You can configure and activate encryption for media data (video, audio, meta-
data) on the Encryption page (see page 91).
Auto-connect:
Select the On option to automatically re-establish a connection to one of the
previously specified IP addresses after each restart, after a connection break-
down or after a network failure.
Note
Stream 2 is always transmitted for automatic connections. Bear this fact in
mind when assigning the profile (see page 42).
Audio: (audio version only)
Select the option On if you wish to additionally transmit a standalone G.711
encoded audio stream with alarm connections.
Default camera:
Here you can select the camera whose image will be automatically displayed
first on the receiver when the alarm connection is made. Depending on the sys-
tem configuration, the receiver can then select the other cameras as well.
Note
The numbering follows the labeling of the video inputs on the actual unit.