Filter
Top Products
VIP X2 | Installation and Operating Manual EN | 65
Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser
Alarm input/Motion alarm/Video loss alarm:
You can select the alarm sensor that is to trigger a recording. You can also use
the motion and video alarm for a camera to trigger the alarm recording by
another camera.
Note
The alarm sensor must be active to be able to trigger the recording.
The alarm inputs and video loss alarms are activated on the page Alarm
sources (see page 69). The motion alarms are configured and activated
for each camera on the page VCA (see page 73).
The numbering of the check boxes for the alarm inputs corresponds to the label-
ing of the alarm inputs on the VIP X2. For the motion and video loss alarm, the
numbering corresponds to the labeling of the video inputs.