Bosch Appliances LBB 3573 Home Security System User Manual


 
NOTE: It is not possible to start Intercom if 15 language channels have been
selected in the System Installation module.
NOTE: Windows 2000 and NT 4.0 or higher DO NOT support Network
Card LBB 3510/00. Therefore, a serial port must be used to connect the CCU
to the control PC. In this case, there is no connection for the headphone and
intercom handset (since this is located on the Network Card). To use the
headphone and intercom handset, use the DCN table-top or flush-mounted
hardware (please refer to the DCN Installation and Operating Manual for
more information). Otherwise, a warning message will appear.
NOTE: When a direct connection is made between the control PC and the
CCU, the headphone control GUI for the operator will be disabled (please
refer to page 3-3).
The DCN software uses two user-created files that contain important
information about the installed hardware configuration and about
delegates’ names. These files are:
Installation file - containing information about channel assignment and
the numbers that have been assigned to all microphones connected to the
DCN. These seat numbers are assigned using the System Installation
software (LBB 3585).
Names file - containing information about the name, seat number and
other conference and personal details of participating delegates. Names
files are created using the Delegate Database software (LBB 3580).
DCN software modules may be started up from the Startup main window
without specifying either an installation or names file. However, some
software modules will not run without the appropriate installation or
names file.
Intercom makes use of the information contained both in an installation file
and a names file. The screen line as specified in a names file is used by Inter-
com to define delegates. The seat numbers assigned using System Installa-
tion and contained in an installation file are also used. The number of DCN
communication channels to be used for intercom purposes is also assigned
using System Installation and contained in an installation file.
Digital Congress Network Intercom
Page 2-3 Software User Manual
GETTING STARTED
2