Filter
Top Products
32 Troubleshooting AutoDome Easy
December 06, 2006 | F01U032279 Installation and Configuration Manual Bosch Security Systems, Inc.
19 Troubleshooting
If you experience difficulties operating your AutoDome Easy camera, refer to the following. If
the guidelines do not enable you to solve the problem, contact an authorized technician.
20 Preventive Maintenance
The following the preventive maintenance schedule allows detection and correction of minor
faults before they become serious and cause equipment failure. Periodically perform the fol-
lowing:
• Inspect all connecting cables for deterioration or other damage.
• Wipe housing with a clean damp cloth. Clean P.C (LEXAN) dome/windows with an
approved P.C (LEXAN) Cleaner (Novus LEXAN cleaner-plastic polish).
• Verify that all the mounting hardware is secure.
21 Spare Parts List
Problem Check
Nothing appears on the screen. Are the power cord and line connection between
the camera and monitor made properly?
The image on the screen is dim. Is the lens dirty? If so, clean the lens with a soft,
clean cloth.
The contrast on the screen is too weak. Adjust the contrast feature of the monitor. Is the
camera exposed to strong light? If so, change the
camera position.
The image on the screen is flickers. Does the camera face directly into the sun or fluo-
rescent lighting? If so, reposition camera.
The image on the screen is distorted. Is the power frequency set properly in sync? If the
power frequency is not set correctly, the line lock
synchronization mode cannot be used. Set the syn-
chronization mode to INT.NTSC Model power fre-
quency in LL mode: 60 Hz.
Command Description
9965 300 00640 Covert liner
9965 300 00643 Wire harness assembly
9965 300 00644 Black
9965 300 00645 White
Bubble assembly with screws
www.boschsecurity.com User manual
9965 300 00648 Accessory kit
9965 300 00649 Bubble tether
9965 300 00650 Screws for bubble tether
9965 300 00651 Mounting plate
9965 300 00652 Bubble screws torx lock
9965 300 00653 O-ring for bubble screws