Filter
Top Products
16 Program and Operation AutoDome Easy
December 06, 2006 | F01U032279 Installation and Configuration Manual Bosch Security Systems, Inc.
10.3 Preset Menu
The preset menu is designed to create and edit up to 60 sequential preset titles. The preset
must be saved prior to editing a title see section Section 10.3.1: Setting and Saving Presets.
10.3.1 Setting and Saving Presets
The AutoDome Easy is designed to save up to 60 preset locations. Each preset location has a
pan/tilt/zoom data capability which is defined by the user. To set a preset position, do the fol-
lowing:
1. Exit the OSD menu.
2. Move the joystick to the desired preset position.
3. Press Set + (1-60) + ENTER.
A message, PRESET SAVING... is displayed on the screen.
If the user attempts to save over an existing preset shot, a confirmation message is dis-
played: OVERWRITE CURRENT SCENE?
MAIN MENU PRESET MENU
PRESET NUMBER: 01
TOUR TITLE: Scene 1
AUTO PAN 0/1234567890 1/1234567890
SECTOR --- ** ** *===== --- ==========
ALARM 2/1234567890 3/1234567890
CAMERA SETUP - ========== - ==========
DOME SETUP 4/1234567890 5/1234567890
EXIT - ========== - ==========
SAVE AND EXIT
EXIT W/O SAVE
Menu Description
Number Represents the presets which have been saved. Twisting the joystick with a preset
number highlighted moves the camera to the saved preset location.
Title Controls a 10-character scene name which is displayed when the AutoDome Easy
moves to a scene (must be user defined via the Title OSD).
#/1234567890 Indicates the preset shot saved with a “*” symbol below the number.
Save and Exit Saves the data and exits the menu.
Exit W/O Save Exits the menu without saving the data.
i
NOTICE! Saving data is temporary. To save data permanently, select the SAVE AND EXIT
command.
i
NOTICE! If the message, Out of Sequence is displayed, a preset save is being attempted that
is not available. All preset positions must be set in sequential order. To verify the next number
in the sequence, enter the Preset menu and scroll through the saved presets. The last number
displayed is the next available preset position.