Filter
Top Products
LTC 8555 Series | Instruction Manual | Troubleshooting
EN
|
29
Bosch Security Systems | 29 August 2003
9.2 Local Keyboard Test --
Keyboard User Function 1
Keyboard User Function 1 is an Allegiant system
keyboard feature used to verify that all the keyboard’s
LEDs and switches are in working order. This function
also automatically calibrates the center position of the
analog joystick. Upon starting this test, the keyboard
emits a short beep and all LEDs light for about two
seconds. During this time, note any LED failures.
Each key may be pressed to display a unique code
number associated with that key. Follow the table below
to ensure that the keyboard is properly processing all
keys. The amount of deflection of the Joystick during
pan/tilt actions is indicated by a speed indicator value in
the first digit position of the LED display. Rotation of the
Zoom control indicates a value of x41 when rotated
clockwise, and x40 when rotated counterclockwise. Push
USER last, as this exits the keyboard test mode.
If the login system features have been selected by the
system installer, the same local test can be initiated while
the keyboard is not online, by pressing "*" (the star key).
KeyValue
Set 001
Prog 002
Lock 003
Alarm 004
Ack 005
Monitor 008
Shot 009
Digit 1 010
Digit 4 011
Digit 7 012
Digit 0 013
* (Star) 016
On 017
Digit 2 018
Digit 5 019
Digit 8 020
Camera 024
Off 025
KEY VALUE
Digit 3 026
Digit 6 027
Digit 9 028
Enter 029
Seq 032
Run 033
Next 034
Prev 035
Hold 036
Clear 037
Focus (high) 042
Focus (low) 043
Iris (high) 045
Iris (low) 046
(Down) x50
(Right) x51
(Up) x52
(Left) x53
User (enter/exit)