Filter
Top Products
LTC 8555 Series | Instruction Manual | User Information
EN
|
25
Bosch Security Systems | 29 August 2003
7.5.17 Programming a SalvoSwitching Camera
Sequence
A SalvoSwitching® sequence allows specification of a
group of monitors that will switch together as a
synchronized group. To program a salvo sequence, enter
the programming mode as described above for a simple
camera sequence. Since a salvo sequence involves
multiple monitors switching as a group, the sequence
must involve more than 1 monitor. An example of a
simple salvo sequence that switches cameras on three
monitors simultaneously is shown below in spreadsheet
format:
In general, follow the instructions used for the simple
camera sequence described above, but instead of
entering a number of seconds for steps that must switch
instantly, enter 61 and press ENTER. When 61 is
entered, the switcher automatically changes to the salvo
abbreviation SLV. Dwell time (in seconds) is entered
only upon reaching the step containing the last monitor
to be switched within the synchronized group.
7. 6Keyboard User Functions
Keyboard User Functions are used to configure system
settings that do not require changing on a frequent basis.
Only operators with a level 1 priority have access to all
functions, and several require entry of a password. A
summary list is shown below; for complete configuration
details, refer to the appropriate section of the Allegiant
Installation manual.
CAMERA MONITOR DWELL
11 SLV
22 SLV
33 2
71 SLV
82 SLV
93 2
21 1 SLV
22 3 SLV
23 3 2
No. Function Description Access Level
1. LO CAL KEYBOARD TEST Any
2. SHOW KEYBOARD NUMBER Any
3. BEEPER ON/OFF Any
4. POSITION MONITOR DISPLAY 1-7
1
5. DISPLAY BRIGHTNESS 1-7
1
6. DISPLAY ON/OFF 1-7
1
7. SET TIME 1-7
1
8. SET DATE 1-7
1
9. SET CAMERA TITLE 1
10. CHANGE PASSWORD Any
2
11. SET TIME/DATE FORMAT 1
12. DE FAU LT MONITOR DISPLAYS 1
13. CO NF IG URATION TABLE PRINTOUT 1
14. NOT USED 1
15. SYSTE M RESET 1
2
16. ENABLE TIMED EVENTS 1
17.SET MONITOR TITLE 1
18. SE QU ENCE PRINTOUT 1
19. ALARM RESPONSE SELECTION 1
2
20. SELECT PRINTING MODE 1
21. DE SIGNATE MONITOR TYPE 1
2
22. SELECT AutoDome SPEED TYPE 1
2
23. DISPLAY CPU VERSION NUMBER Any
24. ALL MONITOR DISPLAY POSITION 1-7
1
25. ALL MONITOR DISPLAY BRIGHTNESS 1-7
1
26. ALL MONITOR DISPLAY ON/OFF 1-7
1