Bosch Appliances 8555 Home Security System User Manual


 
LTC 8555 Series | Instruction Manual | Unpacking
EN
|
9
Bosch Security Systems | 29 August 2003
1UNPACKING
This electronic equipment should be unpacked and
handled carefully.
Check for the following items:
•LTC 8555 Series Keyboard
•3 m (10 ft) Data/power cable with 6-pin connectors,
p/n 303 0239 001
Allegiant Quick Reference Card,
p/n 3935 890 11212
Allegiant Quick Reference Card,
(LTC 8555/01 and LTC 8555/03 models only)
p/n 3935 890 10512
Installation manual (this manual)
p/n 3935 890 1151#
(where # designates the revision number)
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, notify your Bosch Security
Systems Inc. Sales Representative or Customer Service.
The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.
2SERVICE
This device contains no user serviceable parts. If the
unit ever needs repair service, the customer should
contact the nearest Bosch Security Systems Service
Center for authorization to return and shipping
instructions.
Service Centers
U.S.A.: Phone: 800-366-2283 or 408-956-3895
fax: 800-366-1329 or 408-956-3896
e-mail:NationalServiceCenter@ca.slr.com
Canada: 514-738-2434
Europe, Middle East & Asia Pacific Region:
32-1-440-0711
For additional information, see
www.boschsecuritysystems.com.
3KEYBOARD MODELS
The LTC 8555 Series keyboards are available in four
models. The table below summarizes the differences
between models:
Model No. Top bezel graphics Protocol
LTC 8555/00 English text RS-485
LTC 8555/01 Icons RS-485
LTC 8555/02 English text RS-232
LTC 8555/03 Icons RS-232
The LTC 8555/00 and LTC 8555/01 models use the
Allegiant RS-485 communication protocol, and are the
most common versions. These models are ready to
operate as soon as they’re connected to the Allegiant
system.
The LTC 8555/02 and LTC 8555/03 are similar, but
use an RS-232 communication protocol. These models
can be used with communication links such as dial-up
modems, or other media that support full duplex RS-
232 transmission. Since the RS-232 models connect to
the Allegiant’s RS-232 ports rather than the standard
RS-485 keyboard ports, some initial configuration
programming of the Allegiant switcher is necessary.
With a few minor exceptions, general operation is
identical for all models.
Although the LTC 8555/00 and LTC 8555/01 are
compatible with Allegiant systems of any age, the
LTC 8555/02 and LTC 8555/03 models require
Allegiant CPU firmware version 7.6 or higher.
Although this version was released in late 1998, it is
possible to update older systems using a firmware
download in some cases or by replacement of the CPU
module with a current version. If necessary, contact
your local sales office for additional details.